DCP ClearStep PRO Green Deposit Remover Professional

• Surface preparation: Remove as much green deposit and dirt as possible using a brush or scraper.
• Dilution: Mix 1L DCP ClearStep PRO with 9L water.
• Application: Follow the instructions of the high- or low-pressure cleaning device to add DCP ClearStep PRO.
• Spraying: Evenly apply the diluted solution to the soiled surface.
• Operating conditions: Ensure temperatures between 20-30°C and avoid application in rain, frost, or intense sun.
• Coverage: 1L of diluted solution covers 5-10 m², depending on surface roughness and structure.
• Curing time: Allow at least 24 hours for the product to take effect and ensure 48 hours of dry weather after application.
• After drying: Brush off any remaining debris and rinse with clean water if needed for optimal results.
• For stubborn contamination: Repeat the treatment if necessary.
• Finishing: Treated surfaces can be painted after the cleaning process if desired.

Active content: C12-C16 alkylbenzyldimethylammonium chloride (207 g/L)
Classification: H314 (causes severe skin burns and eye damage), H410 (very toxic to aquatic life with long lasting effects)
Appearance at 20 °C: Clear liquid
Odour: None
Freezing Point: < 0 °C
Storage: 0 – 35 °C
Flammability: Will not ignite readily
pH at 20 °C: 7.7 (100%)
Density at 20 °C: 0.98 g/cm³
Solubility in water: Fully

Suitable for all materials both indoors and outdoors.

• Outdoor surfaces: sidewalks, facades, driveways, roofs, terraces 
• Furniture & structures: garden furniture, verandas 
• Building materials: concrete, slate 
• Indoor areas: basements, bathrooms, warehouses 
• Delicate surfaces: glass, wood